Видео

Can I just slap this bad boy right on the DE?

How do I wire this up to my 95 cx hatchback with a b16a swap

Why do you need to pull the dipstick to allow the oil to drain when you have already loosened the filler cap? Tighten the drain plug, but what is the torque spec? Since I own a torque wrench, I torque everything, including the filter.

Factory manifolds or custom headers? Pics?

is that greta,s car lol

is this afc capable of correcting AFR from 12.0 to 15.0 at idle ? MAP sensor at idle is 1.9 , but it should be around 1.55 volts is it capable of correcting this MAP voltage ? ive got 4age 20v silvertop itb's on a 16v 4age . vacuum is the best i can make from them = -0.4 bar instead of -0.6 ( sinlge throttle ) . i built a large volume vacuum block ( 1.5 liter) with a check valve to eliminate pulse . idles nice , runs good, no hesitation . and brake booster works fine . its just the idle afr is to rich . anyone care to share knoledge about AFC apexi? thanks!!!!!!

What about RAMJET 3?

Sounds sick

Settings? Wide and Low?

Like an engine only does one thing to produce peak power. What about drivability/ behaviour , throttle response, low and mid range torque, fuel economy, bonnet open / bonnet closed, hot day intake air temps and the list goes on. My experience with the OTR's is they are a great place to accumulate bugs and debris. I much prefer how the yanks do it with an enclosed shielded air box and the biggest filter they can house.

My 03 Z M6 made 280HP an 270TQ with jus afew bolt-ons 🔩😲! Sumthin isn't right wtf 🤷🤦🤔

a question, with what transmission do you have the 4age. Thank you, greetings from Ecuador

What about a rear strut tower bar

No power gains mentioned ?????Waste of a video doesn't show anything

Very very good video glad to see mods tested this way

Was the car running on e85 or regular gas

dat facepalm....funny)

I recently had a shaft broke on the supercharger. Does anyone know where I can get parts?

Hpa???

I'd love to know what settings you ended up with and what size bars you were running ? I bought a 20mm and 16mm whiteline kit , started at full stiff both ends found the rear was doing all the work while the front wasn't doing any work so I went to the middle setting on the rear but now it just understeers. I'm thinking of softening the front off before resorting to going back to full stiff at the rear as the understeer is quite bad now. The rest of the suspension is stock any thoughts ?

nice

Shit results compared to Aussie

So to pull out the trim for the push button start do you need to fiddle a lot with it or does it come out handy?

shes a bit hot dont ya think

How do you make the branch connection

What's the deal with that gauge face? What advantages were you guys chasing with that?

322kw what a load of crap there is no way to make those numbers with exhaust and intake only

what gear ratios in km/hr this 4 spd gearbox ?

wheres the aggresive idle or does have cut outs closed

What stage kit is this?

what manifold does this have? sounds amazing

I don't have a gt86, so why I'm watching this??

Would it be worth it on a b16a with ctr cams and exhaust and flywheel ect?

Is this 422rwkw?

Oooh that whine.... Sexy. So sexy. Pardon My ignorance is this centrifugal or positive displaced... I have an 06 350 base... Fully rebuilt block with forged internals (from the bearings up) ...

What's the cam specs

It's so much of a sleeper that you dont realize it's a sleeper lol

Sounds like a happy dyno to me 306kw for an exhaust and headers and a k & n Filter in the standard box. It sounds like he has mixed up kw with hp.

How much horse power its give???

No orrsom?

didnt even s how us how he took it out... lol

Which exhaust are you using?

Wtf no info . This sucks

*heavy breathing*

Can you please do a build run down?

Ohh weeee

Hi sir, after fitting a supercharger onto the car, should i be running oil of a higher viscosity? please reply and thanks!

anyone getting triggered that she is using a sponge on her wheels then using circle motions on her paint ahhhh the brake dust

And now I'm hard....FUCK!

No ramjet ??